Think there used to be a vurtual piano a while back. Mind you, that may
have been in the days of Cakewalk.
Regards, Phil Muir
P J Muir Productions Music And Audio Production URL: www.philmuir.com/
Hi,
Just been reading up a bit on Sonar 5's step recording and yes, you do need
a means of getting notes into the machine. There was a thread a little
while ago about using the QWERTY keyboard as a note input device - does
anybody have the details, please? If there is a method of doing this, then
we have a complete step recording system with no MIDI controller or keyboard
required.
Best wishes.
Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822
Don't forget to vote for change at http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Sandy Licht
Sent: 28 September 2006 00:18
To: ddots-l@xxxxxxxxxxxxx; ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problems Sustaining Notes
Don't you have to use a midi controller of some kind to use step recording?
In Sonar 5, step recording is definitely more user friendly than it was in
Sonar 2.
At 04:28 PM 9/27/2006, Tim Burgess wrote:to quantise.Hi,
There's the step recording mode. Haven't played with it for a while, but this method of recording made a lot of folks a lot of money in the 80s (giving away my age...).
Best wishes.
Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822
Don't forget to vote for change at http://www.raisedbar.net/petition.htm
-----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Rosser Sent: 27 September 2006 21:44 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Problems Sustaining Notes
Hi Tim, my name is Ross, I also am wanting to make use of the piano roll in sonar 5. I see what you are saying about jaws not being accessible in the piano roll window, I was wandering is there any other way of creating bassline,synth patterns without using the piano roll. Obviously also without using a keyboard or some instrument, I want to be able to do it myself on the computer. thanks Ross ----- Original Message ----- From: "Tim Burgess" <tim@xxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Sunday, September 24, 2006 8:05 PM Subject: [ddots-l] Re: Problems Sustaining Notes
> Phil, > > The Piano Roll is a sort of half-way house between step record > editing and editing using the Event View. It's a lot easier for a > sighted person to see where notes line up to others at their start > and end points when using this view, so it's really useful if you're > preparing patterns, drum or otherwise, that you're intending to > loop, as you can make note durations, etc, really tight without having>right.
> Must have another look at it myself to try and figure out how you
> could express its output in speech and/or Braille, but it certainly
> wouldn't be easy, though it would be great if we could make it > possible.
>
> It's absolutely the right thing to do to define to a manufacturer
> why we need something to work then offer suggestions as to possible
> methods of making it happen.
>
> Best wishes.
>
> Tim Burgess
> Raised Bar Ltd
> Phone: +44 (0)1827 719822
>
> Don't forget to vote for change at
> http://www.raisedbar.net/petition.htm
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx
> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Phil Muir
> Sent: 24 September 2006 08:48
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Problems Sustaining Notes
>
> Hi Sean!!
>
> It's a view that's never been supported by CT. My guess is that, if
> it were scriptable then, David would have done it by now.
>
> I need to take a look at it again. Looked at it briefly however,
> still not entirely convinced that, it's a view that could be made
> really accessible in it's current state, ether with CT or, JSonar.
> For example, if you locate a MIDI note in there, pressing enter on
> it, won't allow you to alter the value.
>
> Also, the various values in the piano roll view, only spoke in
> JSonar, when I set the Jaws highlight to "Say All." Perhaps if we
> had a good understanding of what the piano roll view is used for
> then, we could present a good case to 12 tone, explaining why it
> doesn't work in it's current state, and what would be required to put > it> > It would be worth you getting some of your eyes over there to take a > look at it with you. That would probably confirm it for you. > > Regards, Phil Muir > > ----- Original Message ----- > From: "Sean A. Cummins" <Sean@xxxxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Saturday, September 23, 2006 5:16 PM > Subject: [ddots-l] Re: Problems Sustaining Notes > > >> Why is that Phil?! >> >> SeanA! >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** ddots-l-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >> Subject:- faq >> >> > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq >
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
-- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.407 / Virus Database: 268.12.9/457 - Release Date: 9/26/2006
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq