[duxuser] Re: help with a juliet and dbt 10.5
- From: "Dawes, Stephen" <Stephen.Dawes@xxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Tue, 26 Apr 2005 09:36:22 -0600
David,
This is all well and fine, but as Anne pointed out yesterday, the
automatic update web site is currently down. I checked about 15 minutes
ago, and it is still down today. So how else can someone get this update
that you have been referring to for the past day or two.
Stephen Dawes <B.A., B.Sc.>
Management Systems Analyst
CITO Office, Information Technology #8245 | Phone: (403) 268-5527
The City of Calgary | Fax: (403) 268-2546
PO Box 2100 Postal Station M. | Email:
Stephen.Dawes@xxxxxxxxxx
Calgary, Alberta, Canada. T2P 2M5 | Web:
http://www.calgary.ca
NOTICE -
This communication is intended ONLY for the use of the person or entity named
above and may contain information that is confidential or legally privileged.
If you are not the intended recipient named above or a person responsible for
delivering messages or communications to the intended recipient, YOU ARE HEREBY
NOTIFIED that any use, distribution, or copying of this communication or any of
the information contained in it is strictly prohibited. If you have received
this communication in error, please notify us immediately by telephone and then
destroy or delete this communication, or return it to us by mail if requested
by us. The City of Calgary thanks you for your attention and cooperation.
> -----Original Message-----
> From: duxuser-bounce@xxxxxxxxxxxxx
> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of David Holladay
> Sent: 2005 April 26 10:32 AM
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: help with a Juliet and dbt 10.5
>
> Hello listers:
>
> I really think this problem is caused by the original 10.5
> (without installing DBT 10.5 Service Release 1).
>
> Service Release 1 is *** free *** from the web site.
>
> The easiest way to get the update is to load DBT, click on
> Help, check for updates, and see if an update is recommended.
>
> There was a glitch which showed itself if you did not use the
> full carriage width of the embosser. Since the Juliet has a
> huge carriage width, this glitch frequently made rather bad
> output on the back side of Juliet output.
>
> Since this glitch involved the back side of interpoint
> output, yes, one solution is to ask for single sided output.
> Getting Service Release 1 installed is a much, much better
> fix, since it allows you to get proper interpoint.
>
> -- David Holladay
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org. The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
>
>
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
