[duxuser] Re: help with a juliet and dbt 10.5

  • From: "Ann Schroeder" <ann@xxxxxxxxxxx>
  • To: <duxuser@xxxxxxxxxxxxx>
  • Date: Thu, 28 Apr 2005 09:07:39 -0500

Did this work for you. If I try adjusting the pages then the printer won't run a full page.

----- Original Message ----- From: "D Hansen" <donald801@xxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Wednesday, April 27, 2005 10:32 PM
Subject: [duxuser] Re: help with a juliet and dbt 10.5


I was advised by Duxbury support to leave the Juliet set to
factory defaults, which on mine is left 1, and right 42.  It was
suggested that I might try adjusting the tractors slightly to the
right.


----- Original Message ----- From: "Ann Schroeder" <ann@xxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Wednesday, April 27, 2005 8:13 AM
Subject: [duxuser] Re: help with a juliet and dbt 10.5


Hi. For the narrow paper I have things set at 25 lines, 1 for the
top and
left margin. If you have the Juliette Classic then you might have
to make
the left margin 2. Also for the narrow paper I make my characters
per line
30 and the wide I do 42. Now, I still am not extremely happy with
the left
margin of the even-numbered pages but don't have a solution.

----- Original Message ----- From: "D Hansen" <donald801@xxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Tuesday, April 26, 2005 11:28 PM
Subject: [duxuser] Re: help with a juliet and dbt 10.5


I got the update, now, the reverse side braille is too close to
the left margin.  The only solution I can see is to decrease
the 
number of characters per line.

Any other suggestions?

Don


----- Original Message ----- From: "David Holladay" <david@xxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Tuesday, April 26, 2005 11:31 AM
Subject: [duxuser] Re: help with a juliet and dbt 10.5


Hello listers:

I really think this problem is caused by the original 10.5
(without
installing DBT 10.5 Service Release 1).

Service Release 1 is *** free *** from the web site.

The easiest way to get the update is to load DBT, click on
Help, 
check for
updates, and see if an update is recommended.

There was a glitch which showed itself if you did not use the
full carriage
width of the embosser. Since the Juliet has a huge carriage
width, this
glitch frequently made rather bad output on the back side of
Juliet output.

Since this glitch involved the back side of interpoint output,
yes, one
solution is to ask for single sided output. Getting Service
Release 1
installed is a much, much better fix, since it allows you to
get 
proper
interpoint.

-- David Holladay

* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also 
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org.  The list
archive 
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *


* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may
also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org. The list
archive 
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *



* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other
subscription
* options by visiting //www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *


* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *



* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *

Other related posts:

  1. Home
  2. duxuser
  3. Archive
  4. 04-2005