[duxuser] Re: help with a juliet and dbt 10.5
- From: "Dawes, Stephen" <Stephen.Dawes@xxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Mon, 25 Apr 2005 09:46:15 -0600
Does anyone know how to reset the Juliet Pro 60 back to the factory
defaults?
Stephen Dawes <B.A., B.Sc.>
Management Systems Analyst
CITO Office, Information Technology #8245 | Phone: (403) 268-5527
The City of Calgary | Fax: (403) 268-2546
PO Box 2100 Postal Station M. | Email:
Stephen.Dawes@xxxxxxxxxx
Calgary, Alberta, Canada. T2P 2M5 | Web:
http://www.calgary.ca
NOTICE -
This communication is intended ONLY for the use of the person or entity named
above and may contain information that is confidential or legally privileged.
If you are not the intended recipient named above or a person responsible for
delivering messages or communications to the intended recipient, YOU ARE HEREBY
NOTIFIED that any use, distribution, or copying of this communication or any of
the information contained in it is strictly prohibited. If you have received
this communication in error, please notify us immediately by telephone and then
destroy or delete this communication, or return it to us by mail if requested
by us. The City of Calgary thanks you for your attention and cooperation.
> -----Original Message-----
> From: duxuser-bounce@xxxxxxxxxxxxx
> [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of David Holladay
> Sent: 2005 April 25 10:16 AM
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: help with a juliet and dbt 10.5
>
> The problem of the extra big back side margins was a problem
> with the original 10.5.
>
> Have you installed Service release 1?
>
> Go to Help, Check for updates, and see if DBT recommends an update.
>
> -- David Holladay
>
> At 05:43 AM 4/25/2005, you wrote:
> >Hi all.
> >
> >I have been playing with this customer to try and get this
> sorted out
> >for quite a while now.
> >I have a juliet as well and mine seems to work properly.
> >
> >We have reset the embosser and tried a whole range of
> parameters both
> >in the document and global menus to try and make this work
> properly but
> >still a huge margin on the reverse side of the page.
> >
> >any info would be appreciated.
> >
> >thanks.
> >Today, I made a discovery. There are two paths to embossing
> materials.
> > When you go through Duxbury, open the files in Duxbury, and then
> >emboss, the file appears with a wide margin on the overleaf
> side of the
> >page.
> >
> >When you print through MS Word, you get interpoint with a margin of
> >about three spaces on the overleaf side. This is progress.
> >previously, I have only printed through Duxbury by opening
> the files
> >and translating and embossing them one by one.
> >
> >There are still questions. What I don't understand is that
> you have to
> >set a margin of 2 to create a margin of one cell on the
> front side of
> >the page. If you don't set the margin at 2, the embossing is flush
> >with the perforations of the tractor-feed strips.
> >
> >The big question is why would the emboss feature be
> different depending
> >on how you access Duxbury?
> >
> >
> >
> >
> >* * *
> >* This message is via list duxuser at freelists.org.
> >* To unsubscribe, send a blank message with
> >* unsubscribe
> >* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> >* subscribe, unsubscribe, and set vacation mode and other
> subscription
> >* options by visiting //www.freelists.org. The list archive
> >* is also located there.
> >* Duxbury Systems' web site is http://www.duxburysystems.com
> >* * *
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org. The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
>
>
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
