[ddots-l] Re: Help needed - please.

  • From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
  • To: <ddots-l@xxxxxxxxxxxxx>
  • Date: Thu, 24 Sep 2009 08:34:39 -0700

The mouse should not have had any effect. Even if a serial mouse with RS-232 
9-pin connector, it would not fit the 15-pin video connector.

Have you yet tried to do a JAWS install?

Dave
  ----- Original Message ----- 
  From: Stacy Blackwell 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Thursday, September 24, 2009 08:29
  Subject: [ddots-l] Re: Help needed - please.


  Thanks, guys, I will try what you said.  
  But, hey, if I did uninstalled the Video Interceptor, is it still there in 
the JAWS program on the DAW?  Can I simply now press Enter on the checkbox 
dialog in the JAWS Utilities in the Video Interceptor Manager?  If I could make 
sure it was back, then changing the resolution will make a difference.  But if 
the VR is not there, then I don't know if changing the resolution is even a 
possibility -- not sure.
  But I don't know why plugging up a serial mouse would have affected the 
video, unless, of course, this was not a mouse port.
  Please keep your comments coming....you're making me feel better...
  SLB  
   
  > From: albertm13@xxxxxxxx
  > Date: Thu, 24 Sep 2009 15:04:06 +0000
  > To: ddots-l@xxxxxxxxxxxxx
  > Subject: [ddots-l] Re: Help needed - please.
  > 
  > Hi,
  > 
  > It works on my computer with JAWS 7.10, 8 & 10 with a few different 
resolutions at 16 & 8-bits but that doesn't mean it'll work on everyone's 
computer. Give Insert+B a try and then try your idea.
  > 
  > Albert
  > 
  > ---------- Original Message ----------
  > From: "Dave Carlson" <dgcarlson@xxxxxxxxxxxxx>
  > To: <ddots-l@xxxxxxxxxxxxx>
  > Subject: [ddots-l] Re: Help needed - please.
  > Date: Thu, 24 Sep 2009 07:49:00 -0700
  > 
  > Albert,
  > 
  > Are you sure that works when the display settings are wrong in the first 
  > place? I've had this happen, and even the JAWS cursor reads nothing. When 
  > it's wrong, nothing reads.
  > 
  > Dave
  > 
  > ----- Original Message ----- 
  > From: <albertm13@xxxxxxxx>
  > To: <ddots-l@xxxxxxxxxxxxx>
  > Sent: Thursday, September 24, 2009 07:43
  > Subject: [ddots-l] Re: Help needed - please.
  > 
  > 
  > Hi,
  > 
  > To read the display resolution that the slider is set to just press 
Insert+B 
  > to read the whole dialog and the first thing it says is the actual 
  > resolution.
  > 
  > Albert
  > 
  > ____________________________________________________________
  > Best Weight Loss Program - Click Here!
  > 
http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsEGrG9QE1ik8cjBymfwECcFm2L8deY7YOAdRNeLgGhoiYKem0doys/
  > PLEASE READ THIS FOOTER AT LEAST ONCE!
  > To leave the list, click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
  > If this link doesn't work then send a message to:
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > unsubscribe
  > For other list commands such as vacation mode,
  > click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subjectúq or
  > send a message, to
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > faq
  > 
  > PLEASE READ THIS FOOTER AT LEAST ONCE!
  > To leave the list, click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
  > If this link doesn't work then send a message to:
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > unsubscribe
  > For other list commands such as vacation mode, 
  > click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=faq or
  > send a message, to 
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > faq
  > 
  > ____________________________________________________________
  > Click now for effective psoriasis treatment solutions.
  > 
http://thirdpartyoffers.juno.com/TGL2131/fc/BLSrjnsEMfM9aZqb1c0dTeOMIMSIRmiEDmEPXzXxZv9oiRQ35rYA40JL1Wg/
  > PLEASE READ THIS FOOTER AT LEAST ONCE!
  > To leave the list, click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
  > If this link doesn't work then send a message to:
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > unsubscribe
  > For other list commands such as vacation mode, 
  > click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subjectúq or
  > send a message, to 
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > faq
  > 


------------------------------------------------------------------------------
  Microsoft brings you a new way to search the web. Try Bing™ now

Other related posts:

  1. Home
  2. ddots-l
  3. Archive
  4. 09-2009