[ddots-l] Re: Problem with automation
- From: "Steve Wicketts" <steve.wicketts@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 26 Jun 2011 20:38:29 +0100
Hi Neville,
The track that your changing the level on using the Snapshot. Is there
effects on the effect column of that track? If there is the snapshot is also
taking a snapshot of the parameters info, not sure why it does this.
Try just changing a level on a track with no effects, it should just do it
without Sonar asking questions.
Steve W
----- Original Message -----
From: "neville" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Sunday, June 26, 2011 7:32 PM
Subject: [ddots-l] Re: Problem with automation
Hmmmm I don't tend to automate affects that much. I find that it happens
when I do automation on the volume of any track. I didn't have this problem
until Sonar 8. Has any one else had this problem? If so how did you fix it.
Is it only safe to do automation on busses now?
May the peace of God which passes all understanding guard your heart and
mind in Christ Jesus. God bless you!
Music soft sacred and soulful
Website http://www.nevillepeter.com
webstore http://www.nevillepeter.com/store
email neville@xxxxxxxxxxxxxxxx
Youtube Channel
http://www.youtube.com/user/NevillePeter777
phone 407-222-4488
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Steve Wicketts
Sent: Friday, June 24, 2011 4:21 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problem with automation
Hi Neville,
It's taking a snapshot of all the effects parameters that are also on that
track.
Have a clean bus track for the level.
Steve W
----- Original Message -----
From: "neville" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, June 24, 2011 6:25 PM
Subject: [ddots-l] Re: Problem with automation
Hmmm maybe that's why I have been getting a strange message from sonar every
time I try to take automation snapshots. The message goes something like
this. About 180 parameters have been automated are you sure you want to draw
so many envelopes? And then it goes on to say something about too many
envelopes can slow down sonar's operations. I am not quoting the message
verbatim, but what I've said is very close to it. It seems to me that when I
try to automate one parameter many other parameters are also being changed.
How would I solve this problem? This has been going on for quite some time,
so any help will be greatly appreciated.
May the peace of God which passes all understanding guard your heart and
mind in Christ Jesus. God bless you!
Music soft sacred and soulful
Website http://www.nevillepeter.com
webstore http://www.nevillepeter.com/store
email neville@xxxxxxxxxxxxxxxx
Youtube Channel
http://www.youtube.com/user/NevillePeter777
phone 407-222-4488
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Peter Bosher
Sent: Friday, June 24, 2011 9:21 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problem with automation
Hi Steve/All,
You used to have to do a double-tap Ctrl-R for an
automation snapshot, but that was changed some
time ago, because it was no longer necessary to
do a separate Automation record operation. So,
in short, whenever you arm tracks for automation,
then any parameter changes are recorded by
default, and Control-R (just once) will take a
snapshot of all armed parameters. Sometimes
that's overkill, so it can be better to take a
single snapshot of just one parameter, which you
can do with applications-key then S.
HTH,
Peter
At 10:14 AM 6/24/2011, you wrote:
Hi Mike,
Correct me if I'm wrong but isn't it hold down
Control then hit the R key twice to create a snapshot?
Steve W
----- Original Message ----- From: "Mike Tyo" <mtyo@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, June 24, 2011 5:39 AM
Subject: [ddots-l] Re: Problem with automation
Ivan,
Go to the point in your project where you want
to return the volume to the value that you had
it set before you recorded the fade; then move
to the volume column and reset it to that
value. At that point, do a control-R to record
an automation point that'll give you a snapshot
of your settings. Make sure that Automation
Write is on, of course, or you won't get this accomplished.
In regards to your tempo problem: Make sure
that you've inserted your original tempo at the
beginning of the project, which I'm assuming
you've done that. Insert the new tempo at the
beginning of the bar where you want it to occur
with control-T. Don't use the "Insert Series of
Tempos" unless you want to do just that.
Hope this helps.
Mike
----- Original Message ----- From: <ivanlopez@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, June 24, 2011 00:17
Subject: [ddots-l] Re: Problem with automation
Thanks Kevin, though I cannot seem to figure out how insert the volume
change.
I don’t see under insert (alt+I) a volume option.
Can you let me know, or where in the CT manual covers volume changes.
The CT manual does make reference to inserting volume changes, but
don’t see where it tells you how to do it.
Also, I have inserted a tempo change in a different bar and track and it
does not change the tempo.
Do you know if there is a catch to inserting tempo changes beyond going
to insert tempo?
Thanks,
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
__________ Information from ESET NOD32
Antivirus, version of virus signature database 6234 (20110623) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32
Antivirus, version of virus signature database 6234 (20110623) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
--
*******
Peter Bosher,
Email: peter@xxxxxxxxxxxxxx
http://www.soundlinks.com/
Tel': (+44) (0) 1494 794 797
Fax: (+44) (0) 1494 583 146
snail://
SoundLinks Limited,
43 Broadlands Avenue,
Chesham,
Bucks.
HP5 1AL
England.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6236 (20110624) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6236 (20110624) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6241 (20110626) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature
database 6241 (20110626) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
