[ddots-l] Re: Problem with automation
- From: "neville" <neville@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 24 Jun 2011 13:25:32 -0400
Hmmm maybe that's why I have been getting a strange message from sonar every
time I try to take automation snapshots. The message goes something like this.
About 180 parameters have been automated are you sure you want to draw so many
envelopes? And then it goes on to say something about too many envelopes can
slow down sonar's operations. I am not quoting the message verbatim, but what
I've said is very close to it. It seems to me that when I try to automate one
parameter many other parameters are also being changed. How would I solve this
problem? This has been going on for quite some time, so any help will be
greatly appreciated.
May the peace of God which passes all understanding guard your heart and mind
in Christ Jesus. God bless you!
Music soft sacred and soulful
Website http://www.nevillepeter.com
webstore http://www.nevillepeter.com/store
email neville@xxxxxxxxxxxxxxxx
Youtube Channel
http://www.youtube.com/user/NevillePeter777
phone 407-222-4488
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Peter Bosher
Sent: Friday, June 24, 2011 9:21 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problem with automation
Hi Steve/All,
You used to have to do a double-tap Ctrl-R for an
automation snapshot, but that was changed some
time ago, because it was no longer necessary to
do a separate Automation record operation. So,
in short, whenever you arm tracks for automation,
then any parameter changes are recorded by
default, and Control-R (just once) will take a
snapshot of all armed parameters. Sometimes
that's overkill, so it can be better to take a
single snapshot of just one parameter, which you
can do with applications-key then S.
HTH,
Peter
At 10:14 AM 6/24/2011, you wrote:
>Hi Mike,
>
>Correct me if I'm wrong but isn't it hold down
>Control then hit the R key twice to create a snapshot?
>
>Steve W
>----- Original Message ----- From: "Mike Tyo" <mtyo@xxxxxxxxxxxx>
>To: <ddots-l@xxxxxxxxxxxxx>
>Sent: Friday, June 24, 2011 5:39 AM
>Subject: [ddots-l] Re: Problem with automation
>
>
>>Ivan,
>>
>>Go to the point in your project where you want
>>to return the volume to the value that you had
>>it set before you recorded the fade; then move
>>to the volume column and reset it to that
>>value. At that point, do a control-R to record
>>an automation point that'll give you a snapshot
>>of your settings. Make sure that Automation
>>Write is on, of course, or you won't get this accomplished.
>>
>>In regards to your tempo problem: Make sure
>>that you've inserted your original tempo at the
>>beginning of the project, which I'm assuming
>>you've done that. Insert the new tempo at the
>>beginning of the bar where you want it to occur
>>with control-T. Don't use the "Insert Series of
>>Tempos" unless you want to do just that.
>>
>>Hope this helps.
>>
>>
>>
>>Mike
>>
>>
>>
>>----- Original Message ----- From: <ivanlopez@xxxxxxxxxxx>
>>To: <ddots-l@xxxxxxxxxxxxx>
>>Sent: Friday, June 24, 2011 00:17
>>Subject: [ddots-l] Re: Problem with automation
>>
>>
>>Thanks Kevin, though I cannot seem to figure out how insert the volume
>>change.
>>
>>I don’t see under insert (alt+I) a volume option.
>>
>>Can you let me know, or where in the CT manual covers volume changes.
>>
>>The CT manual does make reference to inserting volume changes, but
>>don’t see where it tells you how to do it.
>>
>>Also, I have inserted a tempo change in a different bar and track and it
>>does not change the tempo.
>>
>>Do you know if there is a catch to inserting tempo changes beyond going
>>to insert tempo?
>>
>>Thanks,
>>PLEASE READ THIS FOOTER AT LEAST ONCE!
>>To leave the list, click on the immediately following link:
>>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>If this link doesn't work then send a message to:
>>ddots-l-request@xxxxxxxxxxxxx
>>and in the Subject line type
>>unsubscribe
>>For other list commands such as vacation mode,
>>click on the immediately following link:
>>ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>send a message, to ddots-l-request@xxxxxxxxxxxxx
>>and in the Subject line type
>>faq
>>
>>
>>__________ Information from ESET NOD32
>>Antivirus, version of virus signature database 6234 (20110623) __________
>>
>>The message was checked by ESET NOD32 Antivirus.
>>
>>http://www.eset.com
>>
>>
>
>
>__________ Information from ESET NOD32
>Antivirus, version of virus signature database 6234 (20110623) __________
>
>The message was checked by ESET NOD32 Antivirus.
>
>http://www.eset.com
>
>
>
>PLEASE READ THIS FOOTER AT LEAST ONCE!
>To leave the list, click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>If this link doesn't work then send a message to:
>ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>unsubscribe
>For other list commands such as vacation mode,
>click on the immediately following link:
>ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>send a message, to ddots-l-request@xxxxxxxxxxxxx
>and in the Subject line type
>faq
--
*******
Peter Bosher,
Email: peter@xxxxxxxxxxxxxx
http://www.soundlinks.com/
Tel': (+44) (0) 1494 794 797
Fax: (+44) (0) 1494 583 146
snail://
SoundLinks Limited,
43 Broadlands Avenue,
Chesham,
Bucks.
HP5 1AL
England.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
