[ddots-l] Re: Problem with automation
- From: "Annabelle Susan Morison" <foristnights@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 23 Jun 2011 21:41:16 -0700
Have you tried "Series of Tempos"? Also, have you tried "Fade In" and "Fade
Out" under Process Audio "Fade/Envelope"?
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of ivanlopez@xxxxxxxxxxx
Sent: Thursday, June 23, 2011 9:17 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Problem with automation
Thanks Kevin, though I cannot seem to figure out how insert the volume
change.
I don’t see under insert (alt+I) a volume option.
Can you let me know, or where in the CT manual covers volume changes.
The CT manual does make reference to inserting volume changes, but
don’t see where it tells you how to do it.
Also, I have inserted a tempo change in a different bar and track and it
does not change the tempo.
Do you know if there is a catch to inserting tempo changes beyond going
to insert tempo?
Thanks,
----- Original Message --------
> Subject: [ddots-l] Re: Problem with automation
> From: Kevin Gibbs <kevjazz@xxxxxx>
> Date: Thu, June 23, 2011 8:31 am
> To: "ddots-l@xxxxxxxxxxxxx" <ddots-l@xxxxxxxxxxxxx>
>
>
> Insert a new volume value at the end of the fade that restores full volume.
> Otherwise, your volume will be the last volume at the end of the fade.
>
> Sent from my iPhone
>
> On Jun 23, 2011, at 10:26 AM, ivanlopez@xxxxxxxxxxx wrote:
>
> > Howdy list,
> >
> > Do you know how to record an automation fadeout in such a way that it
> > does not affect the volume in subsequent bars?
> >
> > I am experiencing the following problem with recording a fade out volume
> > change using automation
> >
> > On a midi track I have 100 or so bars recorded
> >
> > My gradual fadeout is from bar 41 through 49
> >
> > I disable the read enable button soon after I finish my fade out
> >
> > I check this same track on bar 65 and I notice that the volume is
> > noticeably lower than what it should be
> >
> > Based on the above described situation, do you know how to record an
> > automation fadeout in such a way that it does not affect the volume in
> > subsequent bars?
> >
> > I think I am doing what the CT manual says correctly, but don’t know
> > for sure.
> >
> > Thanks,
> >
> > Ivan
> >
> >
> >
> > PLEASE READ THIS FOOTER AT LEAST ONCE!
> > To leave the list, click on the immediately following link:
> > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> > If this link doesn't work then send a message to:
> > ddots-l-request@xxxxxxxxxxxxx
> > and in the Subject line type
> > unsubscribe
> > For other list commands such as vacation mode,
> > click on the immediately following link:
> > ddots-l-request@xxxxxxxxxxxxx?subjectúq or
> > send a message, to
> > ddots-l-request@xxxxxxxxxxxxx
> > and in the Subject line type
> > faq
> >
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
