[ddots-l] Re: Recording a click track using SONAR's Audio Metronome?
- From: "Mike Tyo" <mtyo@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 6 Aug 2013 17:48:55 -0400
Hi D!J!X!,
Speaking of this business of asio and wdm drivers, I'd be interested in what
you and others prefer to use. I've heard that wdm is better, but then it
depends on what source you're reading, etc. I've been using asio for a while
now without any problems, but now with the discussion of the metronome
underway, I may consider switching to wdm to get more flexibility in my
choices for ins and outs. Any thoughts on these drivers?
Mike
----- Original Message -----
From: "D!J!X!" <megamansuperior@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, August 06, 2013 07:44
Subject: [ddots-l] Re: Recording a click track using SONAR's Audio
Metronome?
Hi, 1 thing to note, virtual audio cable will only work if you are using
wdm. If you are using asio drivers for your interface, as you know you can
only select 1 device at a time. So this solution wouldn't work then, well
not without some other problems. If you have a saffire interface, this is
where the virtual loopback ports come in handy! BTW, I thought you could
record a click by setting it to run on playback as well as recording? So
that when you mix down the bus will include the click track? I think I did
this once a few years ago, don't remember how, but I know it's doable. Or
maybe I used a physical cable, can't remember.
HTH, D!J!X!
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
