Hey Terry, I’m almost certain that your board isn’t fried because if it was it
should not work when the USB cable is unplugged.
What you can try to do is to turn the feature that allows any USB device to
turn off when the computer is trying to go to sleep.
I know that its not happening when your system is on but ,.
Try the following:
go in to the control panel, and select system,
Go under system properties, and elect it,
Select device manager,
Go under Universal serial buss,
you can easily arrow down to go there, and right arrow to highlight the USB
root hub, and hit your application key and arrow down to properties,
Control tab til you hear power management,
tab over to the control that says allow the computer to turn off this device
to save power, and hit the space bar to uncheck it.
Then tab over to ok and repeat the process for any other of the USB root hubs.
Remember to arrow down through each hub, and repeat the process.
If you happen to find a USB root hub specifically for the sound craft, then
only repeat the procedure stated above for that device.
Sound a little strange, but you may have received and update that caused this.
Otherwise if you really want to be sure, try another computer system to see if
this continuers happening, however and I could be wrong but it should work.
Otherwise if it does happen to another computer system, then it is the board.
But I just thought you could give this a stab.
Best
On Sep 29, 2018, at 11:45 AM, Mike Ciarciello <m_dsmusic@xxxxxxxx> wrote:
Terry all my thoughts and prayers are with you in fact tomorrow do just that
when I’m at church.
Sent from my iPhone
On Sep 29, 2018, at 11:23 AM, Terry Taillon <terrytaillon@xxxxxxxxxPLEASE READ THIS FOOTER AT LEAST ONCE!
<mailto:terrytaillon@xxxxxxxxx>> wrote:
God bless you for being so understanding about my frustration. Well, a
couple of things. The notification sound, (the one that means
success), keeps occurring with the pop. It's like it keeps trying to
turn on over and over again. It only occurs when the usb is plugged
in. We uninstalled and reinstalled the drivers just to see what that
would do, but nothing changed. The board works fine without usb
connection. As for any warrantee,
I'm not sure, we got this board through guitar center, and they gave
us a discount on it. Might have been a damaged board when I got it,
but ran for a little over a year. Thanks for your suggestions and I
will see what I can figure out. I'd hate to start a go fund me page,
as that seems a little selfish when there are people with really
serious problems out there. I mean this is serious, but not life
endangering. The commission for the blind might be a thought though.
I've got to do something because I have customers who want their
material finished. I will look in to the warrantee possibility as
well. Again God bless you for your patients and understanding. I know
why you are such a good trainer. I will be in touch. Pray for me
please?
On 9/29/18, Mike Ciarciello <m_dsmusic@xxxxxxxx> wrote:PLEASE READ THIS FOOTER AT LEAST ONCE!
Hey Terry you said you’ve only had the board for a little over a year did
you check the warranty and see how much you have left because I am know for
a fact that mine has a two year warranty you can always bring it in and
they’ll take a look at it it’s at soundcraft
Additionally have you ever tried a service called go fund me the service
allows you to raise money is for whatever equipment you need you can
actually reach out to the whole world and you’ll see if they can help you
out to get your new board with moneys
I’m not trying to suggest that everyone go this route but they’ve had people
actually do go fund me campaign’s for their own vacations and all that jazz
just another way to reach out if you’re stuck or strapped for cash
Finally could you not reach out to your state service to see if they can
find you as you’re trying to start a home business for gaining an income?
I’m just trying to help you out as I can see you’re very very angry about
this just trying to reach out trying to see what other way I can help you
out with
Best Sent from my iPhone
On Sep 29, 2018, at 8:55 AM, Terry Taillon <terrytaillon@xxxxxxxxx>PLEASE READ THIS FOOTER AT LEAST ONCE!
wrote:
My stuff is all plugged in to one surg protecter, but I've actually
only blown one other board and that was because someone plugged an amp
in the wrong place and they had their volume to high and it blew that
board. I will however sepparate my
gear from now on, but it looks like this boar is fryed I am just so
sick because I don't know how I'll replace it. Looks like I won't be
recording for a while.
On 9/28/18, William Hahey <cblair52@xxxxxxxx> wrote:PLEASE READ THIS FOOTER AT LEAST ONCE!
Hi, there are 2 usb ports on the mtk. one is only for power, that is the
one
by fantom power. the other is for datta, and is in the plug area. right
in
front of the RCA Plugs.
if this was already mentioned, disreguard this message. I didn't read
all
the posts!
cheers Bill H
Clean outta sight
-----Original Message-----
From: Albert Milani
Sent: Friday, September 28, 2018 12:19 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: update on my soundcraft mtk22
Did you try Michael's test of the board without a USB port?
Test your board's power supply. Do you have a voltmeter or friends with
one? If your power supply is bad, maybe it's trying to suck power from
the
USB port and it can start but once it gets going, it needs more power
and
can't get enough and drops out.
Albert
________________________________________
From: ddots-l-bounce@xxxxxxxxxxxxx [ddots-l-bounce@xxxxxxxxxxxxx] on
behalf
of Terry Taillon [terrytaillon@xxxxxxxxx]
Sent: Friday, September 28, 2018 3:07 PM
To: ddots-l
Subject: [ddots-l] update on my soundcraft mtk22
Dear list, okay, I have determined that my hubs, (all usb ports on my
pc), are fine. Is it possible that the port on the soundcraft is bad?
If so, can it be replaced? Thanks to all of you especially Rich and
Mike for your help.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
<H�!9 4��z�r�������v��~���
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx
<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx <mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx
<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx <mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx
<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx <mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
faq
